Block Battery 2F1-150 TWO Lithium-Ion On-Board Batteries From ONE

Block Battery 2F1-150
  • The 2F1-150 provides a D-Tap port to power a compatible camera or accessories with 14.4V up to 8A.
  • Provides up to 200W continuous draw, though use at 125W or lower will extend the battery life
  • Charges fully in 1.5 hours with a 2F1 charger.
  • Use with BlockBattery chargers only.
  • 14.4/28.8V 150Wh Lithium-Ion
  • Requires Direct or Gold/V-Mount
  • 14.4 or 28.8V Output Depending on Mount
  • Capacity: 8400mAh / 150Wh
  • Output: 28.8VDC
  • Maximum Load: 200W
  • Accessory I/O: 1 x D-Tap / P-Tap Output
  • Maximum Load: (Accessory I/O)8 A (D-Tap)
  • Storage Temperature: 41 to 77°F / 5 to 25°C
  • Dimensions (W x H x D): 5.75 x 3.94 x 2.28″ / 14.6 x 10 x 5.8 cm
  • Storage Temperature: 41 to 77°F / 5 to 25°C


The 2F1-150 provides two different voltage output circuits in one on-board battery design. The 2F1-150 battery offers power for  14.4V or 28.8V applications, including the most power hungry cinematic camera rigs.
The voltage output is selected via the battery mount. The battery can also be stacked with our Power Couple 98 for extended run time.
Requires appropriate Battery mount adapter:
Gold Mount ( required for 14.4 & 24V capability )
B- Mount for 24v
V-Mount for 14.4v only

Designed For:

  • 14V or 28V Cameras, Lights, & accessories
  • 0-150 Watt Loads


Go to Top